https://cutreadydxf.com/blogs/cnc-fabrication-tips/what-makes-a-dxf-file-cut-ready-for-cnc-plasma 2026-10-03T04:07:55-05:00 weekly https://cdn.shopify.com/s/files/1/0851/3880/0859/articles/kismet-cnc-lesson-01-v2.png?v=1791018475 What Makes a DXF File Cut-Ready for CNC Plasma? Bridged opening showing connected metal to keep and the material removed by cutting. https://cutreadydxf.com/blogs/cnc-fabrication-tips/what-is-kerf-cnc-plasma-cutting 2026-10-03T04:07:56-05:00 weekly https://cdn.shopify.com/s/files/1/0851/3880/0859/articles/kismet-cnc-lesson-02-v2.png?v=1791018476 Plasma Kerf Explained: What It Is, Why It Matters, and How to Find Yours A drawn centerline through a wider removed strip illustrating full kerf width. https://cutreadydxf.com/blogs/cnc-fabrication-tips/how-to-measure-plasma-cutter-kerf 2026-10-03T04:07:58-05:00 weekly https://cdn.shopify.com/s/files/1/0851/3880/0859/articles/kismet-cnc-lesson-03-v2.png?v=1791018478 How to Measure and Verify Your Plasma Kerf One No Offset square cut creates a smaller piece and larger opening; each dimensional difference equals full kerf. https://cutreadydxf.com/blogs/cnc-fabrication-tips/inside-outside-no-offset-cnc-plasma 2026-10-07T06:18:01-05:00 weekly https://cdn.shopify.com/s/files/1/0851/3880/0859/articles/kismet-cnc-lesson-04-v2.png?v=1791018480 Inside, Outside, or No Offset? Which One Should You Choose? No Offset, Inside Offset, and Outside Offset square toolpaths compared with desired finished edges. https://cutreadydxf.com/blogs/cnc-fabrication-tips/plasma-cutting-bridges-minimum-width 2026-10-07T06:18:00-05:00 weekly https://cdn.shopify.com/s/files/1/0851/3880/0859/articles/kismet-cnc-lesson-05-v2.png?v=1791018482 What Are Bridges in Plasma Cutting, and How Wide Should They Be? Unbridged center compared with a center attached to the surrounding sheet by two connections.